Danfoss VLT AQUA Programming Manual page 160

2. Parameter Description
2.14.7. Option Ident. 15-6*
This read-only parameter group contains information about the hardware and software configu-
ration of the options installed in slots A, B C0 and C1.
2
15-60 Option Mounted
Option:
15-61 Option SW Version
Option:
15-62 Option Ordering No
Option:
15-63 Option Serial No
Option:
2.14.8. Parameter Info, 15-9*
Parameter lists
15-92 Defined Parameters
Array [1000]
*
0
15-93 Modified Parameters
Array [1000]
*
0
160
Function:
View the installed option type.
Function:
View the installed option software version.
Function:
Shows the ordering number for the installed options.
Function:
View the installed option serial number.
[0 - 9999] View a list of all defined parameters in the frequency converter.
The list ends with 0.
[0 - 9999] View a list of the parameters that have been changed from their
default setting. The list ends with 0. Changes may not be visible
until up to 30 seconds after implementation.
MG.20.O2.02 - VLT
®
VLT AQUA Drive Programming Guide
®
is a registered Danfoss trademark