Danfoss VLT AQUA Programming Manual page 36

2. Parameter Description
2
The relation will depend on the type of unit selected in par.0-30, Custom Readout Unit:
Unit Type
Dimensionless
Speed
Flow, volume
Flow, mass
Velocity
Length
Temperature
Pressure
Power
0-30 Custom Readout Unit
Option:
[0]
[1]
[5]
[10]
[11]
[12]
[20]
[21]
[22]
36
Dimensionless:
None
* %
PPM
Speed:
1/min
RPM
Pulse/s
Flow, volume:
l/s
l/min
l/h
MG.20.O2.02 - VLT
Speed Relation
Linear
Quadratic
Cubic
Function:
Program a value to be shown in the display of the LCP. The value
has a linear, squared or cubed relation to speed. This relation
depends on the unit selected (see table above). The actual cal-
culated value can be read in
or shown in the display be selecting Custom Readout [16-09] in
par. 0-20 – 0-24, Display Line X.X Small (large).
®
is a registered Danfoss trademark
®
VLT AQUA Drive Programming Guide
Custom Readout
, par. 16-09, and/