Danfoss VLT AQUA Programming Manual page 39

®
VLT AQUA Drive Programming Guide
0-39 Display Text 3
Option:
2.2.6. LCP Keypad, 0-4*
Enable, disable and password protect individual keys on the LCP keypad.
0-40 [Hand on] Key on LCP
Option:
[0]
*
[1]
[2]
0-41 [Off] Key on LCP
Option:
[0]
*
[1]
[2]
0-42 [Auto on] Key on LCP
Option:
[0]
*
[1]
[2]
Function:
In this parameter it is possible to write an individual text string
for display in the LCP or to be read via serial communication. If
to be displayed permanently select Display Text 3 in par. 0-20,
0-21, 0-22, 0-23 or 0-24,
tons on the LCP to change a character. Use the ◀ and ▶ buttons
to move the cursor. When a character is highlighted by the cur-
sor, this character can be changed. A character can be inserted
by placing the cursor between two characters and pressing ▲ or
▼.
Function:
Disabled No function
Enabled [Hand on] Key enabled
Password Avoid unauthorized start in Hand mode. If par. 0-40 is included
in the Quick Menu, then define the password in par. 0-65
Menu Password
Main Menu Password.
Function:
Disabled No function
Enabled [Off] Key is enabled
Password Avoid unauthorized stop. If par. 0-41 is included in the Quick
Menu, then define the password in par. 0-65
word
. Otherwise define the password in par. 0-60 Main Menu
Password.
Function:
Disabled No function
Enabled [Auto on] Key is enabled
Password Avoid unauthorized start in Auto mode. If par. 0-42 is included
in the Quick Menu, then define the password in par. 0-65
Menu Password
Main Menu Password.
®
MG.20.O2.02 - VLT is a registered Danfoss trademark
2. Parameter Description
Display Line XXX . Use the ▲ or ▼ but-
. Otherwise define the password in par. 0-60
. Otherwise define the password in par. 0-60
Quick
Quick Menu Pass-
Quick
39
2