Danfoss VLT AQUA Programming Manual page 134

2. Parameter Description
[40]
[41]
2
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[50]
[51]
[60]
[61]
13-02 Stop Event
Option:
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
134
Drive Stopped
Reset Trip
Auto Reset Trip
OK Key
Reset
Left Key
Right Key
Up Key
Down Key
Comparator 4
Comparator 5
Logic Rule 4
Logic Rule 5
* False
True
Running
In range
On reference
Torque limit
Current limit
Out of current range
Below I
LOW
Above I
HIGH
Out of speed range
Below speed low
Above speed high
Out of feedb. range
Below feedb. low
Above feedb. high
MG.20.O2.02 - VLT
This event is TRUE if the frequency converter is stopped or
coasted by any means (either via digital input, fieldbus or other).
This event is TRUE if the frequency converter is tripped (but not
trip-locked) and the reset button is pressed.
This event is TRUE if the frequency converter is tripped (but not
trip-locked) and an Automatic Reset is issued.
This event is TRUE if the OK key on the LCP is pressed.
This event is TRUE if the Reset key on the LCP is pressed.
This event is TRUE if the Left key on the LCP is pressed.
This event is TRUE if the Right key on the LCP is pressed.
This event is TRUE if the Up key on the LCP is pressed.
This event is TRUE if the Down key on the LCP is pressed.
Use the result of comparator 4 in the logic rule.
Use the result of comparator 5 in the logic rule.
Use the result of logic rule 4 in the logic rule.
Use the result of logic rule 5 in the logic rule.
Function:
Select the boolean (TRUE or FALSE) input to deactivate Smart
Logic Control.
Enters the fixed value of FALSE in the logic rule.
Enters the fixed value TRUE in the logic rule.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
See parameter group 5-3* for further description.
®
is a registered Danfoss trademark
®
VLT AQUA Drive Programming Guide