Main Menu - Can Fieldbus - Group - Danfoss VLT AQUA Programming Manual

®
VLT AQUA Drive Programming Guide
*
0
9-94 Changed Parameters (5)
Array [116]
No LCP access
Read only
*
0

2.11. Main Menu - CAN Fieldbus - Group 10

2.11.1. 10-** DeviceNet and CAN Fieldbus
Parameter group for DeviceNet CAN fieldbus parameters.
2.11.2. 10-0* Common Settings
Parameter group for configuring common settings for CAN fieldbus options.
10-00 CAN Protocol
Option:
*
[1]
10-01 Baud Rate Select
Option:
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[0 - 115] This parameter displays a list of all the frequency converter pa-
rameters deviating from default setting.
[0 - 115] This parameter displays a list of all the frequency converter pa-
rameters deviating from default setting.
Function:
DeviceNet View the active CAN protocol.
NB!
The options depend on installed option.
Function:
Select the fieldbus transmission speed. The selection must cor-
respond to the transmission speed of the master and the other
fieldbus nodes.
10 Kbps
20 Kbps
50 Kbps
100 kbps
* 125 Kbps
250 Kbps
500 Kbps
800 Kbps
®
MG.20.O2.02 - VLT is a registered Danfoss trademark
2. Parameter Description
125
2