Sense:voltage[:Dc]:Aperture - Keysight U2722A Programmer's Reference Manual

8 SENSe Subsystem

SENSe:VOLTage[:DC]:APERture?

Syntax
SENSe:VOLTage[:DC]:APERture? (@<ch>)
This will query the sampling time for a single voltage measurement point. The
parameter has a unit of seconds.
Parameter
Item
<ch>
Remark
The aperture value is derived from the following equation.
Returned Query Format
<NR3>
The reading is in the form +1.000000E+01.
Example
SENS:VOLT:APER? (@2)
Typical Response: +2.000000E-02
See Also
SENSe:CURRent[:DC]:APERture?
SENSe:CURRent[:DC]:NPLCycles
SENSe:VOLTage[:DC]:NPLCycles
SYSTem:LFRequency
48
Type
NR1
NPLCycles
Aperture =
Line frequency
Range of values
1 through 3
Keysight U2722A/U2723A Programmer's Reference
Defaul t value
Required parameter