Measure:array:voltage[:Dc] - Keysight U2722A Programmer's Reference Manual

MEASure:ARRay:VOLTage[:DC]?

Syntax
MEASure:ARRay:VOLTage[:DC]? (@<ch>)
This query initiates and triggers a measurement and returns an array containing
the digitized output voltage in volts. The sampling rate is set by
SENSe:SWEep:TINTerval
SENSe:SWEep:POINts.
Parameter
Item
<ch>
Returned Query Format
<NR3>{,<NR3>}
The reading is in the form of +9.99999999E+10 when output is set to OFF.
Array values responses are separated by commas.
Example
MEAS:ARR:VOLT? (@1)
See Also
MEASure:ARRay:CURRent[:DC]?
SENSe:SWEep:POINts
SENSe:SWEep:TINTerval
Keysight U2722A/U2723A Programmer's Reference
Type Range of values
NR1 1 through 3
whereas the returned number of points is set by
MEASure Subsystem
Defaul t value
Required parameter
6
39