[Source:]Memory:list:read - Keysight U2722A Programmer's Reference Manual

9 SOURce Subsystem

[SOURce:]MEMory:LIST:READ?

Syntax
[SOURce:]MEMory:LIST:READ? (@<ch>)
This command reads the commands from the channel active memory list.
Parameter
Item
<ch>
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Returned Query Format
<AARD>
Memory list's command responses are separated by semicolons.
If there are no commands in the memory list, null is returned.
Example
MEM:LIST:READ? (@1)
See Also
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:LOAD
[SOURce:]MEMory:LIST:STORe
66
Type
NR1
Range of values
1 through 3
Keysight U2722A/U2723A Programmer's Reference
Defaul t value
Required parameter