Initiate Subsystem; Initiate[:Immediate]:Transient - Keysight U2722A Programmer's Reference Manual

5

INITiate Subsystem

INITiate[:IMMediate]:TRANsient

Syntax
INITiate[:IMMediate]:TRANsient (@<ch>)
This command enables the transient trigger system. When a transient or output
trigger is initiated, an event on a selected trigger source causes the specified
triggering action to occur. If the trigger system is not initiated, all triggers are
ignored.
Parameter
Item Type
NR1
<ch>
Example
INIT:TRAN (@1)
See Also
ABORt:TRANsient
34
Range of values
1 through 3
Keysight U2722A/U2723A Programmer's Reference
Defaul t value
Required parameter