2
SCPI Status Registers
Operation Status Registers
These registers record signals that occur during normal operation. The group
consists of a Condition, PTR/NTR, Event, and Enable register. The outputs of the
Operation Status register group are logically-ORed into the OPERation summary
bit (7) of the Status Byte register.
Bit Definitions: Operation Status Registers
Bit number
0 to 1 Not Used
2 DTG1-tran
3 DTG2-tran
4 DTG3-tran
5 WTG1-tran
6 WTG2-tran
7 WTG3-tran
8 to 15 Not Used
All bits in the Operation Enable register will be cleared when you execute the
STATus:PRESet
22
Decimal value
Definition
0
0 is returned.
4
The transient system has received a trigger signal and operation is running
in channel 1
8
The transient system has received a trigger signal and operation is running
in channel 2
16
The transient system has received a trigger signal and operation is running
in channel 3
32
The transient system is waiting for a trigger in channel 1.
64
The transient system is waiting for a trigger in channel 2.
128
The transient system is waiting for a trigger in channel 3.
0
0 is returned.
command. This command presets the Operation Status registers.
Keysight U2722A/U2723A Programmer's Reference