[Source:]Memory:list:load - Keysight U2722A Programmer's Reference Manual

[SOURce:]MEMory:LIST:LOAD

Syntax
[SOURce:]MEMory:LIST:LOAD (@<ch>)
This command loads the channel active memory list from the nonvolatile memory.
Parameter
Item
<ch>
Remarks
This command is only applicable for the U2723A USB Modular SMU.
Example
MEM:LIST:LOAD (@1)
See Also
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:LIST:CLEar
[SOURce:]MEMory:LIST:POINts?
[SOURce:]MEMory:LIST:READ?
[SOURce:]MEMory:LIST:STORe
Keysight U2722A/U2723A Programmer's Reference
Type
NR1
Range of values
1 through 3
SOURce Subsystem
Defaul t value
Required parameter
9
65