Siemens SIMATIC ET 200pro Series Operating Instructions Manual page 68
Low voltage converter for the distributed i/o system
Hide thumbs
Also See for SIMATIC ET 200pro Series:
- Operating instructions manual (545 pages) ,
- Quick manual (260 pages) ,
- Original instructions manual (256 pages)
Table of Contents
Advertisement
Configure the hardware
5.3 Configure the hardware in SIMATIC Manager
Further information about the F-switch and F-RSM modules is available online:
● F-switch: Manual
● F-RSM: Manual
Configure the fail-safe inverter
Requirements
● STEP 7 V 5.3 SP3 or higher
● S7 Distributed Safety V5.4 or higher (F Configuration Pack V5.5 SP1 or higher)
● S7 F systems V5.2 SP2 or higher
Procedure
To configure a fail-safe inverter, proceed as follows:
1. Configure an ET 200pro with an IM154-4 interface module
2. Add an F-switch or F-RSM.
68
Distributed I/O System ET 200pro, Fail-Safe Modules
SIMATIC ET 200pro Motor Starters
PROFINET IO
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
PROFIBUS DP
SIMATIC ET 200pro FC-2 converter
Advertisement
Table of Contents
