Siemens SIMATIC ET 200pro Series Operating Instructions Manual page 260

Appendix
A.4 Acceptance tests for the safety functions
Function table
The active safety functions depending on the operating mode and safety equipment are
shown in the function table.
Operating
mode
Table A- 5
Operating
mode
Automatic
Acceptance test reports
File name of the acceptance reports
Data backup
Data
Acceptance test reports
PLC program
Circuit diagrams
Countersignatures
Commissioning engineer
The commissioning engineer confirms that the tests and checks listed above have been
correctly executed.
...
260
Safety equipment
Example of a function table
Safety equipment
Protective door closed
Protective door open
Emergency Stop button
pressed
Date Name
...
Drive
Drive
Conveyor belt
Conveyor belt STO
Conveyor belt STO
Storage medium
Archiving type Designation
Company/dept.
...
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
Selected safety function
Selected safety function
---
Holding area
Date
Signature
...
SIMATIC ET 200pro FC-2 converter
Checked
Checked
---