Factory Setting Of The Inverter Control - Siemens SIMATIC ET 200pro Series Operating Instructions Manual
Low voltage converter for the distributed i/o system
Hide thumbs
Also See for SIMATIC ET 200pro Series:
- Operating instructions manual (545 pages) ,
- Quick manual (260 pages) ,
- Original instructions manual (256 pages)
Table of Contents
Advertisement
Commissioning
6.3 Preparing for commissioning
6.3.1
Factory setting of the inverter control
Switching the motor on and off
The inverter is set in the factory so that after it has been switched on, the motor accelerates
up to its speed setpoint in 10 seconds (referred to 1500 rpm). After it has been switched off,
the motor also brakes with a ramp-down time of 10 seconds.
Figure 6-2
74
Switching on and switching off the motor and reversing in the factory setting
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
SIMATIC ET 200pro FC-2 converter
Advertisement
Table of Contents
