Repair
9.1 Replacing the ET 200pro FC-2
5.
Remove the memory card from the card reader at the rear of the
converter.
6.
Fit the memory card into the new converter.
7.
Fix the converter to the DIN rail using the eight fixing screws.
Notes:
The weight of the converter must be supported during the
•
fixing process to ensure that the converter is fitted correctly to
the DIN rail.
The torque for the fixing screw is: 1.5 Nm
•
200
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
SIMATIC ET 200pro FC-2 converter