Spare Parts And Accessories - Siemens SIMATIC ET 200pro Series Operating Instructions Manual

3.3

Spare parts and accessories

Optical cable
The optical cable is used to connect the IOP Handheld Kit with an RS232 interface to the
optical interface of the converter. Electronics integrated in the cable converts electrical
signals of up to 115 kBd into optical signals and vice versa.
Optical cable
Order No.
3RK19 22-2BP00
Overview of supplementary products
A complete, up-to-date listing of all supplementary products for the ET200pro can be found
at the following link:
Listing of supplementary products
(https://support.industry.siemens.com/cs/gb/en/view/65355810)
Motor cable
Prefabricated motor cables up to 10 m long are available ex stock for connecting the motor.
Longer lengths up to 15 m can be obtained from our SINAMICS service providers.
Motor cables (discontinued but available as spare parts)
Order No.
6ES7194-1LA01-0AA0
6ES7194-1LB01-0AA0
6ES7194-1LC01-0AA0
6ES7194-1LD01-0AA0
Power jumper connector
Using the power jumper connector it is possible for one converter to loop through up to 25 A
from 3AC 400 V to another frequency converter mounted directly alongside. The common
fusing of the primary supply is provided externally.
Power jumper connector
Order No.
3RK19 22-2BQ00
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
3.3 Spare parts and accessories
Length
1.5 m
3.0 m
5.0 m
10.0 m
Description
29