Components For Assembling A Frequency Converter - Siemens SIMATIC ET 200pro Series Operating Instructions Manual

Australia and New Zealand (RCM formerly C-Tick)
The inverters showing the test symbols fulfil the EMC requirements for Australia and New
Zealand.
Immunity to voltage drop of semiconductor process equipment.
The inverters comply with the requirements of standard SEMI F47-0706.
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
Certificates for download
● EC Declaration of Conformity:
● Certificates for the relevant directives, prototype test certificates, manufacturers
declarations and test certificates for functions relating to functional safety ("Safety
Integrated"):
● Certificates of products that were certified by UL:
● Certificates of products that were certified by TÜV SÜD:
Standards that are not relevant
China Compulsory Certification
The inverters do not fall in the area of validity of the China Compulsory Certification (CCC).
3.2

Components for assembling a frequency converter

General information
The following section shows two configuration examples for frequency converters in the
ET 200pro distributed I/O system.
You can find additional general information on the ET 200pro distributed I/O system in the
Internet underET 200pro distributed I/O system
(https://support.industry.siemens.com/cs/de/en/ps/man)
To select components for a ET 200pro distributed I/O system, we recommend the "SIMATIC
ET 200 Configurator".
The ET 200pro system contains a large number of components which the user can combine
according to his needs.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
3.2 Components for assembling a frequency converter
Description
25