Interfaces; Communication Interfaces; Optical Interface - Siemens SIMATIC ET 200pro Series Operating Instructions Manual
Low voltage converter for the distributed i/o system
Hide thumbs
Also See for SIMATIC ET 200pro Series:
- Operating instructions manual (545 pages) ,
- Quick manual (260 pages) ,
- Original instructions manual (256 pages)
Table of Contents
Advertisement
Installation
4.8 Interfaces
4.8
Interfaces
4.8.1
Communication interfaces
Overview
Figure 4-13
4.8.1.1
Optical interface
Description
The ET 200pro FC-2 has a serial optical communication interface with USS protocol for
commissioning using the Intelligent Operator Panel. RS232/optical conversion is performed
in the cable between the IOP and the frequency converter.
44
Communication Interfaces
Optical Interface for commissioning the frequency converter using an IOP (Intelligent
Operator Panel)
ET 200pro system and bus interface
Safety inputs and 24 V input supply connections
Memory card reader
Mini USB connector for commissioning the frequency converter using a direct connection
to a PC through a local USB connection
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
SIMATIC ET 200pro FC-2 converter
Advertisement
Table of Contents
