Et 200Pro Fc-2 Frequency Converters In General Industrial Applications - Siemens SIMATIC ET 200pro Series Operating Instructions Manual

EMC phenomena
High-frequency electromagnetic field, ampli-
tude-modulated
Ground leakage current
1) Reduction of motor speed
2) Shutdown on fault F00003 "Undervoltage"
3) Shutdown on fault F00002 "Overvoltage"
The requirements of the product standard for a drive system, according to C3, are fulfilled.
Operation with unshielded cable is not permitted.
Table 11- 8
Motor frequency
Hz
50
20
10
5
Standby
11.5.4.2

ET 200pro FC-2 frequency converters in general industrial applications

Explanatory notes for general industrial application
In this EMC application, the manufacturer/assembler must certify the devices used as
compliant with the EMC directive for industrial environments. The limit values are in line with
the generic standards EN 61000-6-4 for generic emissions (noise radiation) and EN 61000-
6-2 interference immunity in the second environment (industrial).
Limit values for general industrial application
The following tables contain the key limit values for compliance with the generic standards.
Table 11- 9 Limit values for noise radiation for general industrial application to EN 61000-6-4
EMC phenomena
Radiated emissions
Conducted emissions
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
Basic standard
for test proce-
dures
EN 61000-4-3
EN 61800-5-1
Ground leakage currents to EN 61800-5-1 with 15 m CY shielded cable
Ground leakage currents (mA) at pulse frequency
4 kHz
1,95
2,58
2,70
2,74
0,53
Basic standard for
test procedures
EN 55011
EN 55011
11.5 Electromagnetic compatibility of the converters
Level
80 MHz – 1000 MHz, 10 V/m,
80 % AM
See the two tables below.
8 kHz
1,39
1,73
1,78
1,79
Limit value
Class A, Group 1
Class A, Group 1
Technical data
Evaluation crite-
rion
A
--
12 kHz
1,19
1,37
1,40
1,40
243