Auto Sleep Mode - Canon CLC5151 Reference Manual

Hide thumbs Also See for CLC5151:
Table of Contents

Advertisement

Auto Sleep Mode

You can set the machine to enter the Sleep mode whenever you desire, by pressing the control panel
power switch. To reactivate the machine, press the control panel power switch again.
NOTE
• The machine may not enter the Sleep mode completely depending on certain conditions. (For more
information, see "Energy Consumption in the Sleep Mode," on p. 4-36.)
• The Auto Sleep mode enables you to conserve more energy than the Low-Power mode.
• Turn the control panel power switch OFF when not using the machine for a prolonged period of time, for
example, at night.
• If a Macintosh, which has been shut down, is connected to the machine via a USB cable, when the
machine returns from the Sleep mode, the Macintosh may turn ON. In this case, disconnect the
Macintosh from the machine. (You may also be able to solve this problem by using a USB hub between
the machine and the Macintosh).
• The time it takes for the machine to automatically enter the Sleep mode can be set from 10 minutes to
4 hours. The default setting is '1' hour. (See "Auto Sleep Time," on p. 4-64.)
• If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the touch
panel to be displayed after pressing the control panel power switch.
Low-Power Mode
The Low-Power mode conserves energy by turning OFF the control panel, and reducing the power
consumption of the fixing unit (only for the CLC5151) or turning OFF the power of optional equipment
(only for the CLC4040/iR C4580i/iR C4080i) when the machine is idle for a certain period of time (after
the last print job or key operation is performed).
the Low-Power mode. To reactivate the machine, press
NOTE
• The Low-Power mode conserves more energy than the Energy Saver mode when the Energy Saver
mode is set to '-10%', '-25%', or 'None'.
• The time it takes for the machine to automatically enter the Low-Power mode can be set from
10 minutes to 4 hours. The default setting is '15' minutes. (See "Low-Power Mode Time," on p. 4-65.)
maintains a steady green light while the machine is in
.
Overview of the CLC5151/CLC4040/iR C4580i/iR C4080i
2
2-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clc4040Imagerunner c4580iImagerunner c4080i

Table of Contents