Making Multiple Copies With A Selected Copy; Ratio - Canon PC880 Operator's Manual

Making Multiple Copies with a Selected
Copy Ratio
You can set the copy ratio using either the Preset Copy Ratio key or Zoom key and also enter a copy quantity
greater than one both at the same time.
1
Place your original on the platen glass.
...............................
2
Press the Copy quantity/Zoom Input (–/+) keys to enter the
desired copy quantity (1-100).
The selected copy quantity is displayed in the Copy quantity/Copy
ratio display.
To increase the copy quantity, press the (+) key.
To decrease the copy quantity, press the (–) key.
To clear the copy quantity to 1, press the Clear/Stop (
...............................
3
Set the copy ratio using either the Preset Copy Ratio key or Zoom
key.
Preset Copy Ratio:
Press the Preset Copy Ratio key the number of times
necessary to light up the indicator in the Preset Copy quantity/
Copy ratio display for the desired copy ratio. (See p. 35.)
Zoom Ratios:
Press the Zoom key, then press the (+) or (–) keys within
three seconds, to set the desired copy ratio. The selected
copy ratio will then appear in the Copy quantity/Copy ratio
display. (See p. 36.)
MEMO:
Three seconds after you have finished setting the copy ratio or stopped
pressing the (+) or (–) keys, the percentage mark will disappear and
the Copy quantity/Copy ratio display will show the copy quantity.
...............................
4
Press the Start ( ) key.
MEMO:
After copying begins, you cannot change the copy quantity. To change
the copy quantity, press the Clear/Stop (
quantity.
To stop copying, press the Clear/Stop (
...............................
38
) key.
) key and reenter the copy
) key.
Paper size marks
Zoom
Lift
Zoom
C
Lift