Communication panel
1
2
3
1
12V 1A output
2
Trigger output 1
3
Trigger output 2
4
Wired remote input
5
LAN connection
Quad DP1.2 input card
1
1
Quad DisplayPort 1.2 channel A Input
2
Quad DisplayPort 1.2 channel B Input
Installation conditions
Requirement
Operation temperature
Humidity
Power
Dimensions without lens
[W x L (no front cover) x H]
Weight without lens
250mm
WARNING: Do not place heat sensitive objects or materials in the area of the hot air output. (Orange
arrows).
4
5
6
6
USB connector 2
7
USB connector 1
8
HDMI Input
9
Display Port 1.4
2
Value
10 - 40°C / 50°F - 104°F (Altitude 0 - 1500 m)
10 - 35°C / 95°F - 104°F (Altitude 1500 - 3000 m)
20 - 80% RH
100 - 240V / 50 - 60 Hz
472 x 562 (542) x 286 mm / 18.6 x 22.1 (21.3) x 11.3 in
30 kg / 66.1 lbs
The projector must be installed with free air space on the projectors
left and rear side of minimum 250 millimeters. The air inlet is on the
left side, and the hot air output is on the rear side.
7
8
9
3
3
Quad DisplayPort 1.2 channel C Input
4
Quad DisplayPort 1.2 channel D Input
- 2 -
12
13
10
11
10
Sync I/O 2
11
Sync I/O 1
12
Status LED's
13
IR receiver sensor
4