Configuring The Radius Server - H3C LS-5100-16P-SI-OVS-H3 Configuration

802.1x
H3C Low-End Ethernet Switches Configuration Examples
State = Active
RADIUS Scheme = cams
Access-limit = Disable
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = Disable
Self-service = Disable
Messenger Time = Disable

3.3.2 Configuring the RADIUS Server

The configuration of CAMS authentication, authorization and accounting server
consists of four parts:
Creating an accounting policy
Adding a service
Adding an account user
Configuring the access device
The following parts take CAMS server V1.20 (standard version) as an example to
introduce CAMS configuration.
I. Logging in the CAMS configuration console
1) Enter the correct user name and password on the login page to log in to the CAMS
configuration console.
Figure 3-2 Login page of CAMS configuration console
2) After login, the following page appears:
Chapter 3 Enterprise Network Access
Authentication Configuration Example
3-5