Table of Contents
Advertisement
31 December 1992
10.8 ORIGINAL SKEW ADJUSTMENT
When:
Original skew is not within the adjustment standard
Purpose:
To correct skew
0 ± 2 mm (0 ± 0.08")/400 mm (15.7")..... A1 Sideways
Adjustment
0 ± 2.5 mm (0 ± 0.10")/400 mm (15.7")... A0 Lengthwise
Standard:
Perform:
Turn the eccentric cam clockwise or counterclockwise.
How:
Change the rear turn guide plate position.
[A]
[B]
1. Make several copies and check the copy image.
If a skew image occurs, proceed with the following steps.
2. Open the original feed unit.
3. Remove the top left and right covers.
4. Set the rear original table [A] to the down position.
5. Remove the original feed rear cover [B] (3 screws).
COPY QUALITY ADJUSTMENT
5-65
(10 multi copies)
(5 multi copies)
Advertisement
Table of Contents
