COPY QUALITY ADJUSTMENT
10.3 TONER DENSITY ADJUSTMENT
When:
Purpose:
Perform:
How:
10.4 TONER SUPPLY RATIO SELECTION
When:
Purpose:
Adjustment
Standard:
Perform:
How:
Customer wants to change the overall image
density of the copies.
To change toner concentration inside
development unit.
SP #18
Change the development bias voltage for the ID
sensor pattern by SP #18
The factory setting for toner supply amount is not
appropriate for the type of original in use.
To adjust the toner supply amount.
15% (Factory Setting)
SP #17
Change the toner supply solenoid on period by
SP #17.
5-60
31 December 1992