Table of Contents
Advertisement
31 December 1992
11. OTHERS
11.1 LOWER OZONE FILTER REPLACEMENT
[A]
[B]
NOTE: If the sheet feed is not installed, skip step 1.
1. Open the sheet feeder unit [A] and remove the safety switch cover [B]
(2 screws).
2. Open the middle unit.
3. Remove the right inner cover [C] and support bracket [D] (5 screws).
4. Open the used toner tank cover [E] (1 screw).
5. Remove the lower right cover [F] (5 screws or 7 screws).
6. Replace the lower ozone filter [G].
[D]
[C]
5-67
OTHERS
[E]
[G]
[F]
Advertisement
Table of Contents
