Table of Contents
Advertisement
DEVELOPMENT
5.11 PADDLE ROLLER REPLACEMENT
[A]
[B]
1. Remove the development roller. (See Development Roller Replacement.)
2. Remove the paddle roller bearing [A] and drive gear [B].
3. Remove the right [C] paddle roller shaft (1 E-rings, 1 spacer, 1 bushing)
and replace the paddle roller [D].
4. Adjust the doctor gap and photoconductor gap. (See Doctor Gap
Adjustment and Photoconductor Gap Adjustment.)
[D]
5-40
31 December 1992
[C]
Advertisement
Table of Contents
