Table of Contents
Advertisement
31 December 1992
6. ELECTRICAL COMPONENT DESCRIPTIONS
Refer to the electrical component layout on the reverse side of the Point to
Point (Water proof paper) index numbers.
Name
Motors
Main
Development
Exhaust Fan
Cooling Fan
Vacuum Fan
Magnetic Clutches
Original
Forward Feed
Registration
Original Re-
verse Feed
Solenoids
Toner Supply
Pattern Shutter
Exit Gate
Pick-off Pawl
Paper Stopper
Manual Feed
Recycle Gate
Drives all mechanical components except the
development unit and the fans. (100 Vac)
Drives the development unit. (100 Vac)
Removes heat from around the fusing unit.
(100 Vac)
Provides air flow to the optics cavity. (100 Vac)
Provides suction so that paper is held firmly
on the transport belts and rollers. (100 Vac)
Drives the original forward feed mechanism.
Drives the registration rollers.
Drives the original reverse feed mechanism.
Turns on to supply toner to the development
unit.
On ID check cycles, this solenoid turns on to
move the pattern plate into the light path.
Controls the position of the exit gate. (When
ON, the paper exits downward; when OFF,
the paper exits upward.)
Moves the pick-off pawls against the drum.
Moves the paper stopper down to prevent
paper from being inserted.
Turns ON to engage the manual feed clutch.
Controls the position of the recycle gate.
(ON = recycle gate in down position,
OFF = recycle gate in up position.)
ELECTRICAL COMPONENT DESCRIPTIONS
Function
1-9
Index. No.
5
1
25
6
68
52
50
8
46
19
24
34
40
48
26
Advertisement
Table of Contents
