Table of Contents
Advertisement
31 December 1992
3. DRUM
3.1 DRUM REPLACEMENT
[A]
–To Remove–
1. Open the middle unit and press the cleaning unit release lever [A] to the
rear.
2. Remove the pick-off pawl unit [B] with ID sensor [C] (2 knob screws and 2
connectors).
3. Remove the middle right cover. (See Middle Right Cover Removal.)
4. Open the main board bracket (1 screw).
5. Remove the ground screw [D] securing the cover plate [E].
6. Move the cover plate slightly to the right and remove it.
[E]
[B]
[C]
5-7
DRUM
[D]
Advertisement
Table of Contents
