Table of Contents
Advertisement
PAPER FEED
8.2
1ST/2ND FEED SENSOR REPLACEMENT
[A]
1. Remove the middle right cover.
2. Remove the upper guide plate [A] (2 screws).
3. Remove the 1st feed sensor bracket [B] with the paper stopper solenoid
[C] (2 screws and 2 connectors).
4. Remove the 1st feed sensor [D] from the bracket.
5. Remove the 2nd feed sensor bracket [E] (1 screw and 1 connector).
6. Remove the 2nd feed sensor [F] from the bracket.
[C]
[B]
[D]
5-46
31 December 1992
[E]
[F]
Advertisement
Table of Contents
