Table of Contents
Advertisement
INSTALLATION PROCEDURE
21. Set the leading margin indicator [A] to 00 and the trailing margin indicator
[B] to 01 as follows:
a) Press the margin key [C]. The leading margin indicator will blink.
b) Press the margin set key [D] to set the leading margin indicator to 00.
The trailing margin indicator will blink.
c) Press the plus key [E] once to set the trailing margin indicator to 01.
22. Press the Copy Exit
Way key [F] to turn
on the development
motor. Press the
Copy Exit Way key
again after 2 or 3
seconds to turn the
motor off.
23. Repeat step 22 until
all 3 kg of developer
has been loaded
into the
development unit.
24. Turn off the main
switch and DIP SW
101-7 and 8, and
unplug the power
cord.
25. Set the toner cartridge
[G] as shown in the
figure.
[A]
[C]
[B]
[D]
3-12
31 December 1992
[G]
[F]
[E]
Advertisement
Table of Contents
