Table of Contents
Advertisement
CLEANING
6.2
USED TONER REMOVAL
[D]
1. Remove the middle right cover and open the main board [A] (1 screw).
2. Open the used toner tank cover [B] (1 screw).
3. Disconnect the toner overflow sensor connector [C].
4. Turn the toner collection lever [D] counterclockwise and pull out the used
toner tank [E].
5. Take off the toner collection cap [F] and pour the used toner into a plastic
bag.
6. Clean the toner overflow sensor [G] with a blower brush or equivalent.
[B]
[F]
[C]
5-42
31 December 1992
[A]
[E]
[G]
Advertisement
Table of Contents
