Table of Contents
Advertisement
OPTICS
2.2 FIBER OPTICS ARRAY REMOVAL/CLEANING
1. Remove the exposure glass. (See Exposure Glass Removal.)
2. Remove the light sensor board [A] (1screw and 1 connector).
3. Remove the two shoulder screws [B] and washers [C] securing the fiber
optics unit [D].
4. Rotate the fiber optics unit forward and lift it out of the machine.
5. Remove the pattern shutter solenoid unit [E] from the fiber optics unit
(2 screws and 1 connector).
NOTE: Do not miss the spring [F] on the unit.
6. Clean the fiber optics with a soft cloth.
[B]
[A]
[C]
[D]
5-4
31 December 1992
[E]
[F]
[B]
[C]
Advertisement
Table of Contents
