Table of Contents
Advertisement
INSTALLATION PROCEDURE
15. Reset the cleaning
blade by pulling the
release lever [A]
towards the front
side.
Then close the
middle unit and
open the original
feed unit.
16. Open the toner
cartridge cover [B], and
place a level [C] in the
space between the
cartridge cover and the
developer entrance.
Adjust the level of the
machine by turning the
bolts on the 4 machine
feet.
17. Remove the sponge
seal [D] from the
developer entrance.
[A]
[B]
3-10
31 December 1992
[C]
[D]
Advertisement
Table of Contents
