Ricoh FW830 Service Manual page 190

FUSING 31 December 1992
[A]
[B]
[E]
[D]
[F]
[C]
[H]
[G]
[I]
21. Disconnect the two connectors [A] and remove the paper exit unit [B].
22. Remove the lower rear cover [C] (5 screws) and upper rear cover [D]
(4 screws).
23. Remove the small left [E] and right [F] covers (2 screws each).
24. Open the middle unit.
25. Loosen the two screws [G] securing the tension bracket [H].
26. Remove the screw [I] securing the fusing unit.
5-50