Table of Contents
Advertisement
DEVELOPMENT
31 December 1992
[A]
[B]
[C]
[D]
[E]
9. Remove the front exposure glass holder [A] (4 screws).
NOTE: Do not loosen the two paint locked screws securing the holder.
10. Remove the doctor blade [B] (2 screws and 1 connector).
11. Take out the toner cartridge.
12. Remove a screw [C] and push down the harness bracket [D].
13. Remove the toner cartridge holder [E] (Right: 2 screws, Left: Loosen 1
screw).
5-36
Advertisement
Table of Contents
