Table of Contents
Advertisement
31 December 1992
2.3 EXPOSURE LAMP/EXPOSURE LAMP HEATER
REPLACEMENT
[E]
[D]
–To Remove–
1. Remove the middle left cover, front left cover and left horizontal cover.
(See Left Horizontal Cover Removal.)
2. Remove the middle right cover. (See Middle Right Cover Removal.)
3. Close the middle unit.
4. Remove the exposure glass. (See Exposure Glass Removal.)
5. Remove the left lamp socket bracket [A] (1 screw and 1 shoulder screw).
6. Disconnect the 2P [B] and 3P [C] connectors.
7. Remove the left lamp holder [D] (2 screws).
8. Slide the exposure lamp [E] and exposure lamp heater [F] to the left and
remove them from the machine.
9. Remove the heater from the lamp.
[C]
[A]
[F]
[B]
5-5
OPTICS
[E]
[F]
Advertisement
Table of Contents
