Table of Contents
Advertisement
DEVELOPMENT
31 December 1992
[B]
[A]
[E]
[C]
[D]
[F]
[G]
19. Open the main board bracket (1 screw).
NOTE: Mark the original position of the magnet adjusting plate [A]
before removing the plate.
20. Remove the magnet adjustment plate (2 screws).
21. Remove the right positioning gear [B] (1 screw and 1 spacer).
22. Remove a bushing [C] and E-ring [D].
23. Remove the three back spill plates [E] (1 screw).
24. Remove the mixing auger [F].
25. Remove the mixing separator casing [G] (4 screws).
5-38
Advertisement
Table of Contents
