Ricoh FW830 Service Manual page 132

31 December 1992
Code
(PJ =)
31 Pulse generator (roll feeder) abnormal.
32 Upper exit sensor ON check.
33 Upper exit sensor leading edge OFF check.
34 Lower exit sensor ON check.
35 Lower exit sensor leading edge OFF check.
36 Upper exit sensor trailing edge OFF check.
37 Lower exit sensor trailing edge OFF check.
38 Fusing exit sensor leading edge OFF check.
39 Fusing exit sensor ON check.
40 Registration sensor trailing edge OFF check.
41 Fusing exit sensor trailing edge OFF check.
42 Transport sensor ON check.
43 Transport sensor leading edge OFF check.
44 Paper is too long. (Maximum: 3.6 meters)
99 Registration clutch stays on longer than 125
seconds.
Cause of Jam
4-47
JAM CODE LIST
SP Mode No
(Paper Misfeed Counter)
SP56 (Roll feeder)
SP54 (Exit)
SP53 (Pick-off)
SP54 (Exit)
SP53 (Pick-off)
SP55 (Others)