Table of Contents
Advertisement
31 December 1992
38. Plug in the power supply
cord. Turn on DIP
SW101-8 on the main
board and turn on the
main switch.
39. Set the leading
margin indicator [A] to
00 and the trailing
margin indicator [B] to
05.
40. Set the copy counter
indicator [C] to 01
using the plus key.
Then, press the Copy
Exit Way key [D].
Turn off DIP SW101-8
to start initial
conditioning.
Initial conditioning will
start, and stop
automatically when it is
completed.
41. Adjust the toner density
sensor voltage using SP
mode #35.
42. Install the right middle
cover.
43. Check the copy quality
and copier operation.
[A]
[B]
3-17
INSTALLATION PROCEDURE
[D]
[C]
Advertisement
Table of Contents
