Hardware management and maintenance
NOTE:
The output depends on your device model and software version. For more information about the
commands used in this chapter, see the corresponding configuration guides and command
references.
Displaying detailed information about the device
Use the
display device verbose
running status and hardware version, about the device and its interface modules.
<Sysname> display device verbose
Slot 1 SubSlot 0 info:
Status
Type
PCB 1 Ver
Software Ver
CPU Ver
CPLD_A
CPLD_B
CFCard Num
Displaying software and hardware version
information for the device
Use the
display version
device.
<Sysname> display version
H3C Comware Software, Version 7.1.064, Test XXXX
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath T5000-S uptime is 0 weeks, 2 days, 21 hours, 1 minute
Last reboot reason: User reboot
Boot image: sda0:/MAIN-CMW710-BOOT-XXXX.bin
Boot image version: 7.1.064, Test XXXX
Compiled Dec 21 2017 16:00:00
System image: sda0:/MAIN-CMW710-SYSTEM-XXXX.bin
System image version: 7.1.064, Test XXXX
Compiled Dec 21 2017 16:00:00
SLOT 1
CPU type:
DDR3 SDRAM Memory:
SD0:
NSQ1MPBHA
:
Normal
:
RPU
:
VER.B
:
XXXX
:
1.0
:
1.0
:
1.0
:
0
command to display software and hardware version information for the
xxx
xxxM bytes
xxxM bytes
PCB Version:
Ver.B
command to display detailed information, including the
29