Table of Contents
Advertisement
Figure 3 Securing the server
Installing cable management brackets
Install cable management brackets if the server is shipped with cable management brackets. For
information about how to install cable management brackets, see the installation guide shipped with
the brackets.
Connecting external cables
Cabling guidelines
WARNING!
To avoid electric shock, fire, or damage to the equipment, do not connect communication equipment
to RJ-45 Ethernet ports on the server.
•
For heat dissipation, make sure no cables block the inlet or outlet air vents of the fan modules,
heatsinks, GPUs, and PSUs.
•
To easily identify ports and connect/disconnect cables, make sure the cables do not cross.
•
Label the cables for easy identification of the cables.
•
Wrap unused cables onto an appropriate position on the rack.
•
To avoid damage to cables when extending the server out of the rack, do not route the cables
too tight if you use cable management brackets.
Connecting a mouse, keyboard, and monitor
About this task
Perform this task before you configure HDM or enter the operating system of the server.
The server provides one DB15 VGA connector for connecting a monitor. The server is not shipped
with a standard PS2 mouse and keyboard. To connect a PS2 mouse and keyboard, you must
prepare a USB-to-PS2 adapter.
2
Advertisement
Chapters
Table of Contents
