Hardware management and maintenance
This chapter describes how to display running information for the L1000-A, verify and diagnose
transceiver modules, troubleshoot system exceptions, and reboot the L1000-A.
NOTE:
The output depends on your software version.
Displaying detailed information about the L1000-A
Use the display device verbose command to display detailed information about the L1000-A and
interface modules.
<H3C> display device verbose
Status
Type
Hardware
Driver
CPLD
SubCard Num :3
CFCard Num :0
Usb Num
The Fixed SubCard0 on Board0
Status
Type
Hardware
Driver
CPLD
The SubCard1 on Board0:
Status
The SubCard2 on Board0:
Status
Displaying software and hardware version
information
Use the display version command to display software and hardware version information for the
L1000-A.
<H3C> display version
H3C Comware Platform Software
:OK
:RPU
:B
:1.0
:3.0
:1
:Normal
:Fixed Subcard
:B
:1.0
:3.0
:Absent
:Absent
40