Before Use; Mounting The O2 Sensor (Optional) - Siare Falco 101 User Manual

3.2

Before use

3.2.1
Mounting the O

Thoroughly unpack the O 2 cell.

Insert and screw the cell in the space bearing
the label "O 2 SENSOR".

Connect the pin to the O 2 sensor.

Make sure that the RJ connector is correctly
inserted in the ventilator's dedicated socket
[ connector FiO 2 ].
Falco 101
2
sensor (optional)
WARNING !! Operator injury hazard.
To avoid electric shock risk and/or components parts breakage during
interventions, please make sure that the ventilator's power supply is cut
off.
WARNING !! Patient injury hazard
When the ventilator is on, the system carries out a series of checks, such
as including the O 2 sensor connection ("SELF TEST" phase see cfr. 4.2.1)
3-3