Soft Keys: Use - Siare Falco 101 User Manual

2.4.2 Soft keys: use

2-8
ALARM RESET
Press this key to silence the acoustic warning of an active alarm.
After removing the alarm cause, press this key once again to cancel the
visual warning displayed on the screen.
ESC
Press this key to exit the "current" screen and return to the "previous"
one.
START - ENTER
Press this key to start the ventilation in the pre-set mode, using the
physiological respiratory parameters set by the clinician.
ON/OFF
Press the ON/OFF key to start and stop the ventilator. To access the
ventilator, press the ON/OFF key. After a few seconds, on the screen
will appear a series of messages indicating that the system entered the
"SELF-TEST" mode ; this phase will take a few minutes.
At the end of this procedure, push START to begin, the system goes to
STAND-BY mode, ready to ventilate the patient. To turn the ventilator
off, hold the ON/OFF key for few seconds and then confirm the action.
The system features a turn off delay that helps you prevent
any accidental ventilator deactivation during operation.
Mains voltage presence indicator
If the led is on (green color), it means that the lung ventilator is powered
from the mains.
User Manual, DU3111103