Table of Contents
Advertisement
2.5
5.7" LCD Display
On the front side of Falco 101 lung ventilator for Intensive Care, Emergency and
Transport (referred to from now on as ventilator) is a 5.7" LED display that will show all
information necessary for patient ventilation.
The main featured information are: operating mode selection, respiratory parameters
setup and display, visual and acoustic alarm warnings.
Use the control keyboard and the encoder knob on the top of the ventilator to interact
directly with the display: this system is defined as GUI (graphical user interface).
The system defined with the acronym GUI is very easy to use by those who are already
familiarised with lung ventilation: you can find in this paragraph all available functionalities.
IGU: "Operator Mode"
IGU: "Patient Mode"
Falco 101
You can see in the figure below how the GUI is divided into
monitoring areas, parameters setup areas and alarm display areas.
2-9
Advertisement
Table of Contents
