Setting Of Default Values - Siare Falco 101 User Manual

5.2.3 Setting of DEFAULT values

Falco 101
If it is necessary to modify the other parameters values, proceed as
previously described.
Turn the encoder knob clockwise (counter-clockwise) to select another
box of SETUP display.
Press the encoder to access to the modification.
Turn clockwise (counter-clockwise) to increase (decrease).
Press the knob to confirm
Press the ESC soft key to return to the MAIN MENU.
Wait for the system to return automatically to the STAND-BY
visualization.
Press ON-OFF key to return to STAND-BY visualization.
The DEFAULT PARAMETER allows setting the standard factory
parameters.
Press the encoder knob to enable the box
modification.
Turn the encoder knob clockwise (counter-
clockwise) to modify the value of VOLUME
parameter.
Press the encoder knob to confirm the
modification of the VOLUME parameter value.
5-11