5-12
Press and turn the encoder knob and select "MENU".
Press the knob to confirm; the "MAIN MENU" is displayed
To enter the standard FACTORY PARAMETERS press the encoder knob.
In order not to modify the stored parameters press the ESC soft key and
return to MAIN MENU visualization.
Wait for a few seconds, the system automatically returns to STAND-BY
display.
Press ON-OFF key to return to STAND-BY visualization.
The "MAIN MENU" page is
displayed.
Turn clockwise the encoder knob to
select the DEFAULT
PARAMETERS function.
•
Press the encoder to access to
the DEFAULT PARAMETERS
function.
User Manual, DU3111103