2.5.1 Respiratory parameters monitoring
Based on the ventilator parameters set by the clinician and on the patient's
characteristics, the lung ventilator is able to monitor and measure a series of
values necessary for the patient's clinical evaluation.
At the top of the screen, there is a led indicator that displays the pressure
inside the airways in real time. The measured and monitored values are
updated after each breath of the patient.
2-10
The data in the images below refer to VC/VAC operating mode with
standard PRP, and they are only informative, they do not refer to real
clinical cases.
The led bar indicator (scale between -10 to 60 cmH2O), shows
the real-time air way pressure during the breathing phase.
The value displayed is the maximum measured pressure inside
the airways (cmH
O).
2
User Manual, DU3111103