Editing TRENDS view.
Falco 101
•
Press ESC to exit the TRENDS screen and go back to STAND-BY
screen.
•
Wait for the system to return to STAND-BY screen automatically.
•
The two yellow arrows show that
the PRP area is active.
•
Press and turn the encoder knob:
select the two parameters you
want to monitor (e.g. RR - PAW).
•
Press the encoder knob: the two
yellow arrows show that the Hours
area is active (the vertical bar
movement activates).
•
Turn the encoder knob, the vertical
moves to the left of the screen.
•
At the same time the system
updates the Date and Time
(sampling every 4 minutes).
•
At the same time the system
updates the values of the selected
parameters (e.g. Vm - PEEP): the
system displays the trend of the
parameters values.
4-35